Get the official session working first
Enable Remote Play on the console and use the official client on the PC or Mac. Sign in to the same PlayStation account and connect a supported controller as described by Sony. Confirm that you can see and control the console from the app while both devices are on the same network. Sony lists the supported controllers and operating systems separately from the connection settings.
If the console fails to appear, follow Sony’s manual pairing instructions and check network connectivity. A successful connection should let you open the console menu and move through it using the direct controller.
Verify the client’s input expectations
Before inserting the adapter, confirm which controller types the current client accepts on your platform. ConsoleTuner’s compatibility information concerns Titan Two and its output protocols. It does not guarantee that a later Sony client release will accept every emulated controller or preserve touch, audio or haptic features.
If the stream shows video while the controls fail, return to the direct controller to isolate the client’s input path. If the whole stream freezes or disconnects, check the network and Remote Play configuration. Keeping those two tests separate avoids rebuilding a working controller profile to fix a network problem.
Test wake and reconnect before leaving home
If you plan to start Remote Play while the console is resting, check Sony’s documented power settings and try a full reconnect while you are near the console. Confirm that the same client and controller work after the console wakes. Save that baseline so you can distinguish a later network problem from a pairing or wake issue.
Sources
Titan Two AI publishes these guides independently. ConsoleTuner makes the Titan Two device and Gtuner IV.